Applications

Provide protection for all kinds of plastic products, like auto film, plastic panels,plastic decoration panels, helmet, goggles, swimming glasses, plastic furniture, plastic film etc.

Properties

Appearance	Transparent Liquid
Odor	Slight odor
Specific Gravity	0.8±0.01 g/l
PH value	6 - 7
Viscosity	1 mpa.s

Application instruction

GRASi® DH709 is ready to use for waterproof treatment. Plastic surface must be clean and dry.

Smearing,spraying,brushing,soaking are suitable for application. Please apply under the condition of natural ventilation.

Smearing
Using clean soft and high density sponge to dip in the product , smear the metal surface evenly.

Spraying
Spray with suitable low pressure, 10-15 cm distance away ,using clean soft and high density sponge to smear the metal surface evenly.

Brushing
Brushing on small area,then using clean soft and high density sponge to smear the metal surface evenly.

Soaking
Suitable for special objects , soak for liquid,take it out, using clean soft and high density sponge to smear the metal surface evenly.

Cautions

Don't put it to moisture or rain place, and dry it in natural air.

Advise to use when the temperature is between 2℃- 45℃（35.6-113°F).

After full curing time at 24 hours, it will form an outstanding waterproof protection effect.

Maximum coverage per liter is 80-100 square meters, but depends on environmental conditions and usage method.

Storage

• Keep sealed and store in cool and dry place below 40℃（104°F）, use within 18 months.
• Keep away from children.
• Keep away from flame and heat.